Braak, E.; Alliet, M.; Schetrite, S.; Albasi, C. (2011) Aeration and hydrodynamics in submerged membrane bioreactors, J. Memb. Sci., 379, 1-18.

Ben Aim, R. (2004) How to control MBR : Hydrodynamic aspects & Biological aspects, COE Workshop on MBR, Hokkaido University, Sapporo, Japan.

Bérubé, P.R.; Afonso, G.; Taghipour, F.; Chan, C.C.V. (2006a) Quantifying the shear at the surface of submerged hollow fiber membranes, J. Membr. Sci., 279(1-2), 495–505.

Bérubé, P.R. ; Lei, E. (2006b) The effect of hydrodynamic conditions and system configurations on the permeate flux in a submerged hollow fiber system, J. Membr. Sci. 271(1-2), 29–37.

Bérubé, P.R.; Lin, H.; Watai, Y. (2008) Fouling in air sparged submerged hollow fiber membranes at sub- and super-critical flux conditions, J. Membr. Sci., 307(2), 169–180.

Brockmann, M.; Seyfried, C.F. (1996) Sludge activity and cross-flow microfiltration — a non-beneficial relationship, Water Sci. Technol., 34 (9) 205–213.

Buer, T.; Cumin, J. (2010) MBR module design and operation, Desalination, 250, 1073–1077.

Cabassud, C.; Ducom, G.; Laborie, S. (2003) Measurement and comparison of wall shear stresses in a gas/liquid two-phase flow for two module configurations, Proceeding of 5th International Membrane Science and Technology (IMSTEC), Nov. 10-14, Sydney, Australia.

Chan, C.C.V.; Bérubé, P.R.; Hall, E.R. (2011) Relationship between types of surface shear stress profiles and membrane fouling, Wat. Res. 45, 6403-6416.

Chan, C.C.V.; Bérubé, P.R. ; Hall, E.R. (2007) Shear profiles inside gas sparged submerged hollow fiber membrane modules, J. Membr. Sci., 297 (2007) 104-120

Chang, S.; Fane, A.G. (2000)  Filtration of biomass with axial inter-fibre upward slug flow: performance and mechanisms, J. Memb. Sci., 180(1), 57-68.

Chang, S.; Fane, A.G. (2001) The effect of fiber diameter on filtration and flux distribution-relevance to submerged hollow fiber modules, J. Memb. Sci., 184(2), 221-231.

Chang, S.; Fane, A.G. (2002a) Filtration of biomass with lab-scale submerged hollow fibre membrane module: effect of operational conditions and module configuration, J. Chem. Technol. Biotechnol., 77, 1030–1038.

Chang, S.; Fane, A.G.; Vigneswaran, S. (2002b) Experimental assessment of filtration of biomass with transverse and axial fibres, Chem. Eng. J., 87, 121–127.

Chang, S.; Fane, A.G.; Waite, T.D.; Yeo, A. (2008) Unstable filtration behaviour with submerged hollow fiber membranes, J. Memb. Sci., 308, 107-114.

Chang, S. (2011) Application of submerged hollow fiber membrane in membrane bioreactors: Filtration principles, operation, and membrane fouling, Desalination, doi:10.1016/j.desal.2011.03.025

Côté, P. (2000)  Cyclic aeration system for submerged membrane modules, US Patent 6245239.

Cui, Z.F.; Chang,  S.; Fane, A.G. (2003) The use of gas bubbling to enhance membrane processes, J. Membr. Sci., 221(1-2), 1–35.

Cumin, J.; Behmann, H.; Hong, Y.; Bayly, R. (2009) Gas sparger for an immersed membrane, United States Patent Application 20110049047.

De Wilde, W.; Richard, M.; Lesjean, B.; Tazi-Pain, A. (2008) Towards standardization of the MBR technology?, Desalination, 231, 156–165.

Fane, A.G.; Chang, S.; Chardon, E. (2002)  Submerged hollow fibre membrane module — design options and operational considerations, Desalination, 231–236.

Fane, A.G.; Yeo, A.; Law, A.; Parameshwaran, K.; Wicaksana, F.; Chen, V. (2005a) Low pressure membrane process ~ doing more with less energy, Desalination, 185(1-3), 159-165.

Fane, A.G. (2005b) Factors affecting the membrane performance in MBRs, Workshop proceeding, Tsinghua University, Beijing, China.

Ferré, V. ; Trepin, A.; Giménez, T.; Lluch, S. (2009) Design and performance of full-scale MBR plants treating winery wastewater effluents in Italy and Spain, IWA 5th international specialized conference on winery, Trento, Spain.

Fulton, B.; Bérubé, P.R. (2010) Optimal module configuration and sparging scenario for a submerged hollow fiber membranesystem, Proceeding of WEF Membrane Applications Conference, June 6 – 9, 2010, Anaheim, California, USA.

Ghosh, R.; Cui, Z.F. (1999) Mass transfer in gas-sparged ultrafiltration: Upward slug flow in tubular membranes, J. Membrane Sci., 162 (1999) 91.

Guibert, D.; Ben Aim, R.; Rabie, H.; Côté, P. (2002) Aeration performance of immersed hollow-fiber membranes in a bentonite suspension, Desalination, 148, 395–400.

Henshaw, W.J.; Mahendran, M.; Behmann, H. (1996) Vertical cylindrical skein of hollow fiber membranes and method of maintaining clean fiber surfaces, US Patent 5,783,083.

Herold, D. (2011) Energy efficient MBR design: Rabigh refinery, Saudi Arabia, Water Arabia Conference & Exhibition, Bahrain.

Hong, Y. (2010) Personal communication. GE water and process technologies.

Johnson, D.W.; Semmens, M.J.; Gulliver, J.S.(1998) Unconfined membranes: Transfer performance and module design, J. Memb. Sci., 140, 13-25.

Judd, S.J.; Le-Clech, P.; Taha, T.; Cui, Z.F. (2001) Theoretical and experimental representation of a submerged membrane bio-reactor system, Membr. Technol., 135, 4-9.

Kanai, M.; Ferré, V.; Varidakis, F. (2008) Membrane life and replacement market – Our experience in Europe, 1998-2008, IWA Regional Conference Membrane Technologies in water and Wastewater Treatment, Moscow, Russia, June 2-4.

Kiat, W.Y.; Yamamoto, K.; Ohgaki, S. (1992) Optimal fiber spacing in externally pressurized hollow fiber module for solid liquid separation, Water Sci. Technol., 26, 1245-1254.

Kondo, M. (1998) Airlift pump apparatus and method, US Patent 6,162,020.

Kubota Inc. (2010) Personal communication in WEFTEC, New Orleans, LA, USA

Kubota catalogue (2010)

Lebegue, J.; Heran, M.; Grasmick, A. (2008)  Membrane bioreactor: Distribution of critical flux throughout an immersed HF bundle, Desalination, 231, 245–252.

Lee, C.H.; Park, P.K.; Lee, W.N.; Hwang, B.K.; Hong, S.H.; Yeon, K.M.; OH, H.S.; Chang, I.S. (2008) Correlation of biofouling with the bio-cake architecture in an MBR, Desalination, 231, 115-123.

Liu, R.; Huang, X.; Wang, C.; Chen, L.; Qian, Y. (2000) Study on hydraulic characteristics in a submerged membrane bioreactor process, Process Biochemistry, 36, 249–254.

Martinelli, L.; Guigui, C.; Line, A. (2010) Characterisation of hydrodynamics induced by air injection related to membrane fouling behavior, Desalination, 250, 587–591.

Melin, T (2011) Energy consumption, a critical success factor in membrane filtration, Proceeding of 6th IWA special conference on membrane technology for water and wastewater, October 4-7, Aachen, Germany

Ndinisa, N.V.; Fane, A.G.; Wiley, D.E. (2006a) Fouling control in a submerged flat sheet membrane system: Part I – Bubbling and hydrodynamic effects, Sep. Sci. & Technol., 41, 1383–1409.

Ndinisa, N.V.; Fane, A.G.; Wiley, D.E. (2006b) Fouling control in a submerged flat sheet membrane system: Part II – Two-Phase Flow Characterization and CFD Simulations, Sep. Sci. & Technol., 41, 1411–1445.

Ndinisa, N.V. (2006c) Experimental and CFD simulation investigations into fouling reduction by gas-liquid two-phase flow for submerged flat sheet membranes, PhD thesis, The University of New South Wales, Sydney, Australia.

Prieske, H.; Böhm, L.; Drews, A.; Kraume, M. (2010) Optimized hydrodynamics for membrane bioreactors with immersed fl at sheet membrane modules, Desalination and Water Treatment, 18, 270–276.

Qaisrani, T.M.; Samhaber, W.M. (2011) Impact of gas bubbling and backflushing on fouling control and membrane cleaning,Desalination, 266, 154-161.

Rabie, H.;  Côté, P.; Singh, M. ; Janson, A. (2001)  Cyclic aeration system for submerged membrane modules, US Patent 6,550,747.

Santos, A.; Ma, W.; Judd, S.J. (2011) Membrane bioreactors: Two decades of research and implementation, Desalination, doi:10.1016/j.desal.2010.07.063

Sofia, A.; Ng, W.J.; Ong, S.L. (2004) Engineering design approaches for minimum fouling in submerged MBR, Desalination, 160, 67-74.

Sridang, P.C.; Heran, M.; Crasmick, A. (2005) Influence of module configuration and hydrodynamics in water clarification by immersed membrane systems, Water Sci. Technol. 2005;51(6-7):135-42.

Stefanski, M.; Kennedy, S.; Judd, S. (2011) The determination and origin of fibre clogging in membrane bioreactors, J. Membr. Sci., 375, 198-203.

Suk, D.E.; Park, J.S.; Hwang, B.K.; Park, P.K.; Min, G.H.; Mahendran, M.; Doh, J.G. (2012) Development of high performance membrane fibre/module/aerator for a membrane bioreactor, Proceeding of IWA biannual conference, September, Busan, Korea.

Tajima, F.; Yamamoto, T. (1988) Apparatus for filtering water containing radioactive substances in nuclear power plants, US Patent 4756875.

Tardieu, E.; Grasmick, A.; Geaugey, A.; Manem, J. (1998) Hydrodynamic control of bioparticle deposition in a MBR applied to wastewater treatment, J. Membr. Sci. 147 (1998) 1–12.

Tian, J.-Y.; Xu, Y.-P.; Chen, Z.-L.; Nan, J.; Li, G.B. (2010) Air bubbling for alleviating membrane fouling of immersed hollow-fiber membrane for ultrafiltration of river water, Desalination, 260, 225–230.

Ueda, T.; Hata, K.; Kikuoka, Y.; Seino, O. (1997) Effects of aeration on suction pressure in a submerged membrane bioreactor,Wat. Res., 31(3) 489-494.

Wicaksana, F.; Fane, A.G.; Chen, V. (2006) Fibre movement induced by bubbling using submerged hollow fibre membranes, J. Membr. Sci. 271, 186–195.

Yamamoto, K.; Hiasa, M.; Mahmood, T.; Matsuo, T. (1989) Direct solid-liquid separation using hollow fiber membrane in an activated sludge aeration tank, Water Sci. Technol., 21(4-5), 43–54.

Yeo, A.P.S.; Fane, A.G. (2005) Performance of individual fibers in a submerged hollow fiber bundle, Water Sci. Technol., 51(6-7), 165-172.

Yeo, A.P.S.; Law, W.K.; Fane, A.G. (2006) Factors affecting the performance of a submerged hollow fiber bundle, J. Memb. Sci., 280, 969-982.

Yeo, A.P.S.; Law, W.K.; Fane, A.G. (2007) The relationship between performance of submerged hollow fibers and bubble-induced phenomena examined by particle image velocimetry, J. Membr. Sci., 304, 125–137.

Zhang, K.; Cui, Z.; Field, R.W. (2009) Effect of bubble size and frequency on mass transfer in flat sheet MBR, J. Memb. Sci., 332, 30-37.